CANYON TONE STAIN locks into the surface pores of concrete, masonry and brick without forming a heavy surface film. It will not peel or flake when properly applied over these substrates. The pigments and colorants used in CANYON TONE STAIN are prevented from settling by a proven process of chemical suspension. Color uniformity in the container ensures the Contractor of a non-lapping, controlled application and color uniformity on the structure. CANYON TONE STAIN allows the building to breathe by permitting the passage of moisture vapor under a vapor pressure drive. Also available in clear.

One of the most frustrating problems facing Facility Managers, Building Owners and even Homeowners is graffiti. The deliberate defacing of public, municipal and private property is a multi-million dollar problem that continues to grow worse. GRAFFITI SHIELD is a unique, “clear” coating and cleaner system that has been specially designed to help you fight back.
GRAFFITI SHIELD can be applied to any new or existing solid, vertical surface that is free of graffiti. The clear finish is highly abrasion resistant, will not yellow with age, and imparts an attractive low sheen to the surface. GRAFFITI SHIELD is highly resistant to most types of aerosol spray paint and permanent markers, as well as dirt, soot and pollution.
Be prepared for the worst! When the taggers strike and leave their mark, simply wipe their handwork away in less time than it took to create it using GRAFFITI SHIELD CLEANER, a proprietary blend designed to dissolve even the most stubborn graffiti.
For ordinary dirt and grim build-up from daily exposure, GRAFFITI SHIELD makes clean-up a snap. Just use any mild household cleaner and a damp cloth to wipe the surface clean.

ACRYSHEEN is a water-based epoxy, penetrating sealer designed to produce a clear, semi-gloss surface sheen. It is manufactured from non-yellowing, advanced acrylic resins to form a durable finish that provides long term water repellency, dirt and graffiti resistance, and weather protection.

A permanently elastomeric, advanced acrylic membrane for providing waterproofing protection on exterior concrete, masonry, stucco and wood wall surfaces. Bridges hairline cracks and repaired areas, forming a continuous membrane resistant to all forms of weather and airborne pollutants. AQUATHON is a "breathing" membrane, allowing moisture vapor to escape from the substrate or building interior while remaining impervious to mass water penetration from the exterior.


IN-STONE is a water-based, modified acrylic designed to penetrate porous vertical concrete and masonry surfaces. This penetrating, semitransparent stain adds color to substrates such as standard or split-faced concrete block, pavers, cast-in-place concrete, or other concrete and masonry surfaces. It possesses excellent color stability, ultraviolet resistance, alkaline and pollution resistance. IN-STONE is integrally locked into the substrate as a result of its low viscosity and microscopic penetration properties, thus preserving the existing detail on decorative textures. IN-STONE will not crack or peel when properly applied.


IN-WOOD utilizes state of the art wood protection technology in combining the highest quality oils with microscopic Trans-Oxide pigments, allowing maximum penetration for long term performance. Trans-Oxide pigments, at approximately .01 micron, are 1/15 the size of standard paint or stain pigments. These Trans-Oxide pigments allow for superior penetration and ultraviolet protection. The UV transmission is reduced to nearly 5% compared to the 50-65% transmission of common pigments found in semitransparent stains. A natural version is also available for maintaining wood in its present or natural state.


RHINO TOP is a high quality water-based acrylic finish incorporating an epoxy additive to increase the abrasion resistance properties of the film. A special spherical silica sand is suspended in the emulsion to provide a fine uniform texture. This silica can be eliminated for projects requiring a smooth finish.
