Coatings
for spray applied Polyurethane Foam
The
ROOF MATE System for virtually any other
type of roofing substrate.
RoofShield quality elastomeric roof coating
ACRYSHEEN
Can be used as a topcoat over numerous types of new or existing finishes on
roofs, walls and decks to provide sheen, graffiti resistance and/or ease
of cleanability. More info (pdf 144KB)
Project Spotlight:
Marin
County Civic Center - ELASTUFF 101 and 102
Project Spotlight:
SF
Municipal Bus Barn
LEED Performance Rating Program (55Kb PDF)
California
Title 24 (84 KB PDF)
|
|
Liquid applied,
elastomeric, roof coatings systems
 Roof Coating
KYMAX is a low-build elastomeric coating that provides the ultimate in reflectivity, color stability and weather resistance over new or existing roof surfaces. Although it is highly flexible, it exhibits a tough, enamel-like finish that resists abrasion, biological growth, dirt, oil and all types of weather extremes.
KYMAX is recommended whenever exceptional weatherability and/or reflectivity are required. Formulated with Kynar Aquatec™
|
Inch for inch, polyurethane foam is the highest rated
insulation material commercially available. Spray-applied as a two-component
liquid, it raises to 30 times it's fluid thickness to form a seamless,
dimensionally stable blanket over new or existing roof substrates.
|
|
The ROOF
MATE Roof Preservation System is a unique waterproofing
membrane designed to extend the life of virtually any new
or existing roof substrate.
Go to the main ROOF
MATE page.
|
The ELASTUFF
101/102/103 system is designed for protecting
a wide range of substrates from the effects
of weathering and moisture intrusion. It is
particularly effective as a protective membrane
over polyurethane foam on new or existing roofs,
and hot or ambient storage tanks.
The ELASTUFF
101/102/103 System is also designed for
protecting a wide range of substrates from
the effects of weathering and moisture intrusion.
It is particularly effective as a protective
membrane over new or existing roof substrates,
including concrete, metal and asphaltic substrates.
UNISIL is
a single component elastomer that exhibits a rapid
cure when exposed to ambient conditions. Long term
elastomeric properties are retained under all types
of weather conditions, from sub-zero temperatures
to high heat in excess of 300 °F (149°C).
UNISIL is designed for protecting
a wide range of substrates from the effects of
moisture intrusion and weathering. UNISIL is particularly
effective as a protective coating over polyurethane
foam on new or existing roofs, and hot or ambient
storage tanks. |
|
Tech
Report - REFLECTIVITY
ROOF
MATE Project List
(PDF 88KB)
ROHM & HAAS
RoofTopics.com
Building
Codes
(Roofing) NRCA
NRCA
home page
Cool
Construction Materials
Roof Mate Chemical Resistance (55Kb PDF)
California
Title 24 (84 KB PDF)
Miami-Dade
County
(838 KB P DF)
DOE Cool Roof Calculator
|
